Renault KANGOO Vehicle User Manual page 211

GEAR CONTROL
(4/5)
Parking the vehicle
When the vehicle is stationary, move
the lever to position P while keeping
your foot on the brake pedal: the re-
ducer and drive wheels will be mechan-
ically locked.
Note: with position B engaged (B1, B2
or B3), you must shift the lever to posi-
tion D before engaging position P.
Ensure that the electronic parking
brake is engaged.
Special case
If parking on a slope, it is advisable to
apply the parking brake before releas-
ing the parking brake and engaging po-
sition P.
The N position of the lever
does not mechanically lock
the drive wheels, make
sure it is immobilised before
leaving the vehicle.
In the event of an impact to
the underside of the vehicle
(e.g.: striking a post, raised
kerb or other street furni-
ture), this may result in damage to
the vehicle (e.g.: twisted axle), the
electrical circuit or the traction bat-
tery.
Do not touch the circuit elements or
any fluids or liquids.
To prevent any risk of accident,
have your vehicle checked by an
authorised dealer.
Risk of serious injury or electric
shock and risk to life.
P position must only be engaged
when the vehicle is stationary.
2.9