Advertisement
4.1 Cleaning and maintenance
•
The sensor
2
thermometer TM 750 . Protect it from dirt and damage. Clean the
sensor with a cotton bud dipped in warm water or 70% isopropyl
alcohol.
•
Do not immerse the thermometer in water or any other liquid. It is
not watertight.
•
To clean the thermometer, use a soft cloth slightly dampened with
mild soapy water or 70% isopropyl alcohol. Do not let water get into
the unit. Only use the unit again when completely dry.
•
Never use aggressive cleaning agents, thinners, benzine or tough
brushes.
•
Take care not to scratch the lens of the sensor, the display or the
housing.
•
Do not use or store the unit in an environment where the ambient
temperature or humidity is too high or too low (see operating condi-
tions in the "Technical specifications" section), in direct sunshine, in
the vicinity of static electricity or in a dusty environment.
•
Remove the batteries if you do not wish to use the unit for an exten-
ded period of time. Otherwise there is a danger that the batteries
may leak.
•
If the thermometer is used as described in these instructions, no
regular maintenance or calibration is required.
is the most delicate part of the MEDISANA Infrared
4 Miscellaneous
GB
13
Advertisement
