Table of Contents
Advertisement
1. Warnings and Agreements
Welcome! As with any Pinball Machine
modification and add on kit, there is a required level
of expertise for the installation. If you are not
proficient in basic pinball parts installation we
recommend having our kit installed by someone who
is proficient with the basics of pinball repair.
Pinnovators requires our kit be installed by an
experienced Pinball service technician with basic
electrical skills. As with any electrical piece of
equipment a danger does exist and you must agree
to not hold Pinnovators responsible for any injury,
damages, etc. before continuing.
Sound Levels: Pinnovators recommends running
your headphone and subwoofer sound levels at a
safe level to prevent long term hearing loss. For a
good example of recommend sound levels, we
recommend following suggestions given by major
audio equipment manufacturers such as Apple and
their IPod.
phys.org/news80304823.html
www.macworld.com/article/1060274/hearingprotection.html
ESD: We recommend always discharging yourself to
a metal surface on your machine before touching
the electronics inside it.
Power Cord: ALWAYS UNPLUG THE POWER CORD
for safety when working on your pinball machine!
Playfield Propping: Pinnovators highly advises
following Playfield propping instruction for your
pinball machine. These instructions are typically
found inside the Operators manual for each
machine. Failure to follow these instructions can
cause fatal injuries or even Death. Pinnovators also
recommends having an assistant hold a propped
playfield in the up position when servicing under the
playfield.
2
2. Preparation
Unplug the Pinball Machine!
Next remove the back glass on the system to expose
the System circuit boards. Tron is shown below as an
example.
Advertisement
Table of Contents
