Table of Contents
Advertisement
11.
Connecting a Subwoofer
Pinnovators provides a 12 foot cable to give you the
flexibility of placing your subwoofer close by to your
pinball machine. The end of the cable has a 3.5mm
male plug on the end. Plug this end into a subwoofer
that has a 3.5mm input. Some of the Yamaha home
subwoofers only have a 3.5mm input so this will
work great in that situation. Smaller computer
subwoofer systems will also have a 3.5mm input as
shown below.
Pinnovators recommends the Polk Audio PSW10
subwoofer. This model is very affordable and
produces great sound!
Use the included 3.5mm female to RCA adapter
cable to connect to this speaker.
10
12.
Final Checkout
Power up your subwoofer!
Power up your pinball system!
Start a game!
Make sure the front panel switch on the PinPac
Control panel is in the "UP" position if you have
the headphone kit installed.
Verify sound can be heard from the Back Box
speakers and the lower Cabinet speaker.
Adjust the subwoofer to your liking.
13.
PIN-SMX
While we have your attention! Please check out
our PIN-SMX passive subwoofer mixer kit at
Pinnovators.com.
The PIN-SMX allows you to connect up to four
pinball machines to one subwoofer. Each input
is fully isolated from the others to prevent
ground loops. Each input level is fully adjustable
so you can adjust each game sub level to your
liking.
Enjoy your new Subwoofer kit!
The Pinnovators team.
Advertisement
Table of Contents
