Sample Test Label - SATO LT408 Operator's Manual

NOTE: The only print problem that the following sample test label does not display is
fading of print image from one side of the label to the other. This is the result of
improper print head balance.
Compare this scale on each
side to ensure the print is
evenly spaced horizontally .
Visually inspect
these rows for voids
indicating defective
head elements.
Line sharpness is
determined by print
speed and darkness.
Lt408 Operator Manual
Unit 5: Troubleshooting

SAMPLE TEST LABEL

Label Contents Will Vary Depending on Test Label Type .
D S W 1 D S W 2
N O N E
Clear line in print
indicates the ribbon
was wrinkled during
printing.
Figure 5-5, Sample Test Label
5-12
Displays the dip
switch settings at
the time of print.
D S W 3
Compare this scale on each
side to ensure the print is
evenly spaced vertically .
PN: 9001152A