Hex Dump Mode - SATO LT408 Operator's Manual

HEX DUMP MODE

The contents of the print buffer and the data received before it is placed into the print buffer may be examined
through the use of the Hex Dump Mode. Each line of the printed data is enumerated in the first column, the second
column contains the data in hexadecimal format, and the right column contains the same data in ASCII format.
The options of data to be printed are: receive data, receive buffer, and internal data. However, only one type of
data may be printed on a single label. Repeat the dump process to print the other data types as desired.
Use the keys on the printer's operator panel to select and enter the required options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
Lt408 Operator Manual
Unit 4: Printer Configuration
POWER
ONLINE
QTY: 000000
LINE
OFFLINE
QTY: 000000
ENTER
LINE
5 sec.
Cancels
CANCEL
print job
ONLINE MODE
Figure 4-17, Hex Dump Mode
PASSWORD
0000
ADVANCED MODE
CANCEL
ENTER
HEX DUMP MODE
ENTER CANCEL
SELECT DUMP DATA
RECEIVE DATA
RECEIVE BUFFER
INTERNAL DATA
CANCEL
ENTER
Internal Data Receive Data
ENTER ENTER
Hex
Dump is
printed
4-19
Displayed
if password
feature is
enabled
Print
darkness
Receive Buffer
ENTER
Hex
Dump is
printed
PN: 9001152A