SATO CX400 Programming Reference Manual page 43

Section 2: Command Codes
Printer Output
Special Notes
SATO CX400
1. Characters may be enlarged through the use of the Character Expan-
sion command.
2. Character spacing may be altered through the use of the Character
Pitch command. The default is 2 dots between characters. It is recom-
mended to use a spacing of 5 dots for OCR-A and 1 dot for OCR-B.
3. You may also create custom characters or fonts. See the <ESC>T
Custom-Designed Characters command.
4. A font must be defined for each field to be printed. There is no default
font.
5. Fonts U, S, M, OA and OB are identical to fonts U, S, M, OA and OB
on the SATO M-8400 printer. The proportionally spaced fonts XU, XS,
XM, XL and XA can be printed with fixed spacing using the <ESC>PS
Proportional Space command.
6. The matrices for the OA and OB fonts are scaled so that they will
remain a constant size according to the OCR-A and OCR-B specifica-
tions when printed on different resolution printers.
PN 9001106 Rev. A Page 2-27