SATO CX400 Programming Reference Manual page 29

Section 2: Command Codes
Printer Output
Special Notes
SATO CX400
1. When printing the custom character using the Recall command, the
character is affected by the following commands: Character Expansion
Character Pitch Line Feed, Rotate, Fixed Base Reference Point
2. The characters are stored in volatile memory and must be reloaded if
the printer power is lost.
3. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image will
not be printed as specified.
PN 9001106 Rev. A Page 2-13