Grundig VCR 4230 User Manual page 61

6 Cleaning and maintenance
2. Replace the brush after cleaning it and close the cover in the direction of the arrow.
6.3 Cleaning and installation of the side brush
In the long term use, wash the side brush with warm water in order to eliminate the
shape deformation. Install it to the robot as it is shown after it has dried.
6.4 Cleaning of the Sensors & Front wheel
Clean the sensors and charging pins/electrodes regularly and remove the dust using
a dry and soft cloth or a cleaning brush.
Information: You get a notification via the application when sensor cleaning is re-
quired.
Şarj pinleri
Wheel shaft
Tekerlek mili
Robot Vacuum / User Manual 61 / EN