Functions And Controls - Borg & Overstrom T2 User Manual

Functions & Controls
Controls
EcoMode
Model shown with chilled, sparkling and ambient water options.
How to Use:
• To dispense water press desired water option and
hold. Release to finish dispensing.
EcoMode: EcoMode will activate in the instance of
dispense inactivity or low light levels, identified by the
EcoMode symbol being illuminated.
• To turn EcoMode on/off, tap the chilled icon 7
times and hold on the 7th. Two beeps will indicate
EcoMode is on, and 1 beep will indicated off.
CO Bottle Installation - Sparkling Water Model Only
2
1
Unpack CO Regulator and fit
2
elbow fitting to spigot outlet.
Chilled Water Button
Sparkling Water Button
2
OFF
Attach regulator to the CO
2
bottle and ensure the small vent
pressure relief vent is facing
away. Close regulator and
tighten securely.
Ambient Water Button
Chilled icon pulsing: Unit is chilling down.
Warning Symbol: 'Warning triangle' will illuminate
and flash when fault is present. Fault code can be
identified by flash sequence.
3
Connect the assembled CO
bottle and regulator to the CO
inlet using a ¼" pipe.
Warning Symbol
4
Stand the cylinder in a suitable
2
place. We recommend between
2
3.5 - 4 bar (58 PSI) (max). Do
not exceed 4 bar pressure.
58 PSI