Colour Codes; Replacing The Wiper Blade, Rear Window - Volvo XC90 TWIN ENGINE Owner's Manual

MAINTENANCE AND SERVICE

Colour codes

Colour code
The colour code label is located on the car's
right-hand rear door pillar and becomes visible
when the right-hand rear door is opened.
Exterior colour code
Any secondary exterior colour code
It is important that the correct colour is used.
Related information
•
Car paintwork (p. 642)
•
Touching up minor paintwork damage
(p. 642)
644
Replacing the wiper blade, rear
window
The wiper blades sweep water away from the
windscreen and rear window. Together with the
washer fluid they clean the windows and ensure
visibility for driving. Windscreen and rear window
wiper blades can be replaced.

Replacing the wiper blade, rear window

Lift the wiper arm from the window and pull the lower
section of the blade to the right.
Grip the centre of the wiper arm and lift it
1.
from the windscreen to lock position.
NOTE
There is a lock position at half extension
angle that may feel like resistance, this lock
prevents the arm from falling back against the
windscreen. The wiper arm must be pulled
past the lock for wiper blade replacement.
Grip the lower part of the blade and pull
2.
to the right until the blade loosens from the
arm.
3. Press the new wiper blade into place. You
should hear a click. Check that it is firmly
installed.
4. Lower the wiper arm.
IMPORTANT
Check the blades regularly. Neglected main-
tenance shortens the service life of the wiper
blades.
Related information
•
Using the rain sensor (p. 174)
•
Using windscreen and headlamp washers
(p. 176)
•
Using automatic rear windscreen wiping
when reversing (p. 178)