Volvo XC90 TWIN ENGINE Owner's Manual page 285

Activating and starting the Speed
Limiter
13
The speed limiter function (SL ) must first be
selected and activated in order to be able to reg-
ulate the speed.
Set the speed limiter in standby mode
NOTE: The illustration is schematic - details may vary
depending on car model.
Press ◀ (1) or ▶ (3) to browse to the sym-
–
bol/function for speed limiter
> Symbol (4) is shown and the speed limiter
is set in standby mode.
Start the Speed Limiter
The speed limiter cannot be activated until after
the engine has been started. The lowest maxi-
13 Speed Limiter
Speed Limiter
14
mum speed that can be stored is 30 km/h
(20 mph).
– When the speed limiter is in standby mode
and the
steering wheel button
> The Speed Limiter starts and the current
speed is stored as the maximum speed.
Related information
•
Speed Limiter (p. 282)
(4).
symbol is shown - press the
(2).
DRIVER SUPPORT
Managing speed for the Speed
Limiter
14
The speed limiter (SL ) can be set to different
speeds.
Setting/changing the stored speed
NOTE: The illustration is schematic - details may vary
depending on car model.
– Change the set speed with short or long
presses on steering wheel button
(3):
•
Short press: Each press changes the
speed in increments of +/- 5 km/h
(+/- 5 mph).
•
Press and hold: Release the button when
the set speed indicator (4) has moved to
the desired speed.
(1) or
}}
283