Loading mode
From retracted position - grip the handle and
pull out the cover so it slides over the side
panels in the cargo area - pull to the end
position and guide the cargo cover's attach-
ment pins into the grooves in the side panels.
(If the cover is already in the full-cover posi-
tion - see the next point)
From full-cover position - grip the handle and
guide the cargo cover's attachment pins into
the grooves in the side panels and release.
> Retract the cover until it stops in the load-
ing position.
In the event that your hands are occupied:
In the extended full-cover position - lightly
push the handle part of the cargo cover
upward, e.g. with an elbow.
>
The cover retracts until it stops in the
loading position.
To return to full-cover position from loading posi-
tion:
1. Grip the handle and pull the cargo cover out
to the end position.
2. Release slightly and angle the handle by
means of a light downward pressure.
> The cover is locked in the full-cover posi-
tion.
IMPORTANT
Do not load objects on top of the cargo cover.
LOADING, STORAGE AND PASSENGER COMPARTMENT
WARNING
In a 7-seat car, never have the cargo cover fit-
ted when there are passengers in the rear
seats. This may lead to serious injury in the
event of a collision.
Retracting
1. From the full-cover position:
Lift up the handle and pull it backward to dis-
engage the cargo cover's attachment pins
and then release.
From loading position:
Grip the handle and pull out the cargo cover
in the grooves - pull to the full-cover position.
Lift up the handle and pull it backward to dis-
engage the attachment pins and then
release.
2. Retract the cover with its attachment pins
outside of the side panels until it stops in the
retracted position.
Related information
•
Fitting and removing cargo cover* (p. 589)
591
* Option/accessory.