Volvo XC90 TWIN ENGINE Owner's Manual page 295

Hide thumbs Also See for XC90 TWIN ENGINE:
Table of Contents

Advertisement

Deactivate Cruise Control and set it
in standby mode
31
Cruise control (CC
) can be temporarily deacti-
vated so that it is set in the standby mode and
can be reactivated later.
Deactivate Cruise Control and set in
standby mode
NOTE: The illustration is schematic - details may vary
depending on car model.
To set cruise control in standby mode:
Press the steering wheel button
> The cruise control markings and symbols
in the driver display change colour from
WHITE to GREY - cruise control is now
temporarily deactivated and the driver
must then manually control the speed.
31
Cruise Control
Cruise Control
32
Standby mode on driver intervention
The cruise control is temporarily deactivated and
set in standby mode if:
the foot brake is used
the gear selector is moved to N position
the clutch pedal is held depressed for longer
than 1 minute
the driver maintains a speed higher than the
stored speed for longer than 1 minute.
The driver must then control the speed himself/
herself.
A temporary increase in speed with the accelera-
tor pedal, e.g. during overtaking, does not affect
the setting - the car returns to the last stored
speed when the accelerator pedal is released.
Automatic standby mode
Cruise control is temporarily disengaged and set
in standby mode if:
wheels lose traction
engine speed is too low/high
brake temperature is too high
(2).
speed falls below 30 km/h (20 mph).
The driver must then control the speed himself/
herself.
Related information
Cruise Control (p. 290)
DRIVER SUPPORT
Reactivating Cruise Control from
standby mode
32
Cruise control (CC
) can be temporarily deacti-
vated so that it is set in the standby mode and
can be reactivated later.
Reactivating cruise control from
standby mode
NOTE: The illustration is schematic - details may vary
depending on car model.
To start cruise control from standby mode:
Press the steering wheel button
> The cruise control markings and symbols
in the driver display change colour from
GREY to WHITE — the car will now follow
the most recently stored speed again.
(1).
}}
293

Advertisement

Table of Contents
loading

Table of Contents