Running Plu Reports - Royal 601sc Instruction Manual

Chapter 8: Running Reports
Important
An hourly reading must be closed out in the Z position.
To take an hourly report
1 Put the Z key or the PRG key in the Mode key slot and turn it to the X
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, press 11 and the Amount Tend Total

Running PLU Reports

The PLU report shows the quantity and cost of each PLU Number rung up.
Only PLUs that had sales will print.
Important
A PLU Reading must be closed out in the Z position.
To print a PLU report
1 Put the Z or PRG key in the Mode key slot and turn it to the X or Z
2 If you are prompted for a Manager Password, type the password number
3 Press the PLU key.
To print a PLU sales report, according to an assigned Department number
range
1 Put the Z key or the PRG key in the Mode key slot and turn it to the X
2 If you are prompted for a Manager Password, type the password number
3 In the round Number keys area, specify the Starting Dept Number. It
4 Enter the Ending Dept Number as 2 digits.
5 Press the PLU key. The sales history for the PLUs assigned to the
90
or Z position.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
key. The Hourly report prints.
position.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
position.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
must be 2 digits; for example 01.
departments in the specified range prints.
Alpha 600/601 User's Guide