Omron Promi-SD 205-OA User Manual page 40

Promi-SD User Manual – Appendix A. AT Commands
SD Response
Purpose
Parameters
Description
Reference
Example
21 ATH
SD Response
Purpose
Description
Reference
22 AT+BTKEY=$string
SD Response
Purpose
Parameters
Description
Reference
Example
23 AT+BTSD? 
SD Response
Purpose
Description
Reference
24 AT+BTCSD
SD Response
 OK
 CONNECT 112233445566
or
 OK
 ERROR 
Connect to the Bluetooth device with given BD address
112233445566=BD address
Promi-SD attempts to connect to the Bluetooth device with the given BD address. To
make successful connection, the Bluetooth device must be in Page scan. This attempt
continues for 5 minutes.
If it fails to make connection, SD response is 'ERROR'.
AT+BTINQ?, AT+BTSCAN
ATD000B530011FF
 OK
 DISCONNECT
Release the current connection
The current Bluetooth connection is released normally. It takes about 30 seconds to
detect an abnormal disconnection such as power off and moving out of service range.
ATD, AT+BTSCAN
 OK
Change pin code
$string= New pin code (Default="1234")
Pin code is a string, which allows 16 alpha-numeric characters maximum. Based on this
pin code, Promi-SD generates a link key which is used in actual authentication process.
AT+BTCSD, AT+BTFP, AT+BTSD?, AT+BTSEC, ATZ, AT&F
AT+BTKEY="apple"
 112233445566
 OK
Display the list of Bluetooth devices sharing the pin code
Once a connection is made with pin code, Promi -SD saves the Bluetooth device with its
link key generated by pin code. The connection to a device listed in Promi-SD can be
made automatically without authentication process. The maximum number of the list
is 5.
AT+BTCSD, AT+BTFP, AT+BTKEY, AT+BTSEC, ATZ, AT&F
 OK
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
A-9