b)
keyboard
c)
hard drive
d)
base cover
e)
battery
f)
battery cover
5. Follow the procedures in
Removing the right Input-Output - IO board
1. Follow the procedure in
2. Remove the:
a)
SD card
b)
battery cover
c)
battery
d)
base cover
e)
hard drive
f)
keyboard
g)
palmrest
3. To remove I/O board:
a) Disconnect the right speaker cable from the I/O board [1].
b) Remove the M2.5x5.0 screws that secure the I/O board to the computer [2].
c) Lift the I/O board upwards to and remove it from the computer [3].
Installing the right IO board
1. Connect the I/O board connector cable and slide the I/O board into its slot on the computer.
2. Replace the M2.5x5.0 screws to secure the I/O board to the computer.
3. Connect the speaker cable to the I/O board.
4. Install the:
a)
palmrest
b)
keyboard
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
33