Installing the LED board
1. Align the LED board to its original position on the computer.
2. Replace the M2.0x3.0 screw to secure the LED board to the computer.
3. Connect the LED-board cable to the LED board and secure it through the routing channel.
4. Install the:
a)
palmrest
b)
secondary memory
c)
keyboard
d)
hard drive
e)
base cover
f)
battery
g)
battery cover
5. Follow the procedure in
Speaker
Removing the speakers
1. Follow the procedure in
2. Remove the:
a)
battery cover
b)
battery
c)
base cover
d)
hard drive
e)
keyboard
f)
palmrest
3. To remove the speaker:
a) Disconnect the speaker cable from the system board [1].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
39