Operating The Unit - Honeywell CO301PC Owner's Manual

OPERATING THE UNIT

• Fill the tank manually or after hose connection is made, turn on the water supply to the cooler.
• The hose connection to the float valve provides an automatic method of refilling the water supply
as water is evaporated.Whenever possible operate the blower fan at low speed for maximum
cooling.
• When cooling is not required you can operate the unit as a fan only by turning on the fan and
leaving the pump turned off.
• Power ON the unit, and press the SPEED button (LOW or HIGH) on touchscreen panel, to vary
the speed of air flow depending upon your requirement.LOW and HIGH speed will be indicated
with incremental bars on the panel.
• Press the COOL button to turn on the cooling function, which will be indicated by lit up LED of the
COOL button.
• To turn off the unit, press the COOL button to stop the cooling function, then press SPEED button
to reduce the speed to LOW and then the POWER button to turn off the unit.If you do not intend
to use the product for some time, empty the water tank.
• To empty the water tank, turn the unit off using the FAN switch. Unplug the unit from the power
outlet. Remove the drain cap from the bottom and allow the water to drain out.
All manuals and user guides at all-guides.com
USE & OPERATION
13