LG VR95 Ser Series Service Manual page 36

All manuals and user guides at all-guides.com
Technical Descriptions of the Parts
■ PCM(Protection Circuit Module)
Handling and Cautions
8.1 Disassembly: Never disassemble the battery pack. If the pack is damaged and short
circuit is caused by conductive material inflow, overcurrent will flow and there is a risk
of device damage or heat generation.
8.2 Handling: It may cause the falling out of soldered area or welded area, so be careful
during the handling of the battery pack.
8.3 Short circuit: Be careful of the short circuit of the batter pack. If there is a short circuit
in the batter pack, over-current will flow and there is a risk of device damage or heat
generation. Do not expose it to heat.
8.4 Exposure to moist environment: Do not use the battery pack in a moist state. The
current leakage by the moist of the insulating material inside the pack may cause
degradation of the performance.
8.5 Recharging station: Use only the recharging station specified for this battery pack.
Using other recharging station other the specification may cause heat generation,
flame, or an explosion.
-36-