Table of Contents
Advertisement
D430E/DE430E. If it has been recognized, the output information will be
displayed like that:
20:00.0 Class ff00: Digium, Inc. Unknown device 1420 (rev 01)
Subsystem: Unknown device 0005:0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 91c00000 (32-bit, non-prefetchable)
[size=32K]
If D430E/DE430E is not recognized by the system, you have to power off
and take out the card, then try to insert it into another PCI-E slot.
2. Software installation
Some dependencies are crucial. If any of them is absent, the software
installation process would not go through successfully. Let's run "yum
install XX" (XX stands for the dependency's name) to check the
availability of dependencies.
# yum install bison
# yum install bison-devel
# yum install ncurses
# yum install ncurses-devel
OpenVox Communication Co. LTD.
D430E/DE430E on DAHDI User Manual
Figure 3 Hardware detection
16
URL: www.openvox.cn
Advertisement
Table of Contents
