Baxton Studio BBT5391-DC Assembly Instructions

MODEL : BBT5391 - DC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS
: 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Rubber Mallet (not provided).
STEP 1
B
R
R
FRONT
ASSEMBLY INSTRUCTIONS
FRONT
FRONT
A
FRONT L
L
PART LIST
ITEM DESCRIPTION QTY
CHAIR LEG (L)
A 1 PC
CHAIR LEG (R)
B 1 PC
C
SUPPORT RAIL 2 PCS
D CHAIR 1 PC
STEP 2
C
3
C
3
HARDWARE LIST
ITEM DESCRIPTION
1
JCBC Bolt M6 x 45mm
2 WOOD SCREW M4 x 45mm
3
WOOD DOWEL M8 x 30mm
4 M6 SPRING WASHER
M4 ALLEN KEY (BALL SHAPE)
5
1 OF 3
QTY
4 PCS
6 PCS
8 PCS
4 PCS
1 PC