Table of Contents
Advertisement
The following illustration shows the front I/O module for different server models. To locate the front I/O
module, see
Chapter 2 "Server components" on page
Figure 11. Front I/O module
Table 8. Components on the front I/O module
USB 2.0 connector with Lenovo XClarity Controller
1
management
USB 3.2 Gen 1 (5 Gbps) connector
2
1
USB 2.0 connector with Lenovo XClarity Controller management
Connect a USB 2.0 device, such as a mouse, keyboard, or other devices, to this connector.
Note: This is the only USB port that supports USB automation update of the firmware and RoT security
module.
Connection to Lenovo XClarity Controller is primarily intended for users with a mobile device running the
Lenovo XClarity Controller mobile application. When a mobile device is connected to this USB port, an
Ethernet over USB connection is established between the mobile application running on the device and the
Lenovo XClarity Controller.
Select Network in BMC Configuration to view or modify settings.
Four types of settings are available:
• Host only mode
In this mode, the USB port is always solely connected to the server.
• BMC only mode
In this mode, the USB port is always solely connected to Lenovo XClarity Controller.
• Shared mode: owned by BMC
ThinkSystem SR675 V3 System Configuration Guide
24
15.
External diagnostics handset connector
3
VGA connector
4
Advertisement
Table of Contents
