Lenovo ThinkSystem SR675 V3 System Configuration Manual page 14

RAID adapter
• Hardware RAID 0, 1, 10, 5, 50
– ThinkSystem RAID 540-8i PCIe Gen4 12Gb Internal Adapter
– ThinkSystem RAID 5350-8i PCIe 12Gb Internal Adapter
• Hardware RAID 0, 1, 10, 5, 50, 6, 60
– ThinkSystem RAID 940-8i 4GB Flash PCIe Gen4 12Gb Internal Adapter
– ThinkSystem RAID 940-8e 4GB Flash PCIe Gen4 12Gb External Adapter
– ThinkSystem RAID 9350-8i 2GB Flash PCIe 12Gb Internal Adapter
Host bus adapter
• ThinkSystem 440-8i SAS/SATA PCIe Gen4 12Gb Internal HBA
• ThinkSystem 440-8e SAS/SATA PCIe Gen4 12Gb External HBA
• ThinkSystem 440-16e SAS/SATA PCIe Gen4 12Gb External HBA
• ThinkSystem 4350-8i SAS/SATA 12Gb HBA
System fan
Five 80 mm x 80 mm x 56 mm dual-rotor fans
Electrical input
This server supports up to four units of CFF v4 power supplies. Following is the list of supported types:
• 1800-watt Platinum, input voltage 230 Vac
• 2600-watt Titanium, input voltage 230 Vac
Important: Power supplies and redundant power supplies in the server must be with the same power rating, wattage
or level.
Minimal configuration for debugging
• One processor in socket 1
• One DRAM memory module in slots 6
• Two power supply units in bay 1 and 2
• One boot drive, M.2, 2.5-inch, EDSFF E1.S 5.9mm drive, or E3.S 1T drive and RAID adapter if configured. (If OS is
needed by debugging)
• Five system fans
• One OCP module with required cable (if network is required)
ThinkSystem SR675 V3 System Configuration Guide
6