Table of Contents
Advertisement
RTC Alarm Resume : This function is for setting date and time for your computer to boot up.
During "Disabled", you cannot use this function. During "Enabled", choose the Date and Time Alarm:
Date Alarm
Time Alarm
Note: If you have change the setting, you must let the system boot up until it goes to the operating
system, before this function will work.
Primary INTR : When this is set to "On", any event occurring will awaken a system which has been
powered down.
IRQs Activity Monitoring :
IRQ3
(COM 2)
IRQ4
(COM 1)
IRQ5
(LPT 2)
IRQ6
(Floppy Disk)
IRQ7
(LPT 1)
IRQ8
(RTC Alarm)
IRQ9
(IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
á â àß Move
Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
The following is a list of IRQ's Interrupt ReQuests, which can be exempted much as the COM ports
and LPT ports above can. When an I/O device wants to gain the attention of the operating system,
it signals this by causing an IRQ to occur. When the operating system is ready to respond to the
request, it interrupts itself and performs the service.
When set "Enabled", activity will neither prevent the system from going into a power management
mode nor awaken it.
IRQ3
(COM 2)
l
IRQ4
(COM 1)
l
IRQ5
(LPT 2)
l
IRQ6
(Floppy Disk)
l
IRQ7
(LPT 1)
l
IRQ8
(RTC Alarm)
l
IRQ9
(IRQ2 Redir)
l
IRQ10 (Reserved)
l
IRQ11 (Reserved)
l
IRQ12 (PS/2 Mouse)
l
IRQ13 (Coprocessor)
l
IRQ14 (Hard Disk)
l
IRQ15 (Reserved)
l
You can choose which month the system will boot up. Set to 0, to boot
every day.
You can choose what hour, minute and second the system will boot up.
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
34
Item Help
Menu Level
Advertisement
Table of Contents
