Lanner electronics MB-X63 Series User Manual page 33

FFFFFh, resulting in better system performance. However, if any program writes to this memory
area, a system error may result. The settings are "Enabled" and "Disabled".
AGP Aperture Size : Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture
is a portion of the PCI memory address range dedicated for graphics memory address space. Host
cycles that hit the aperture range are forwarded to the AGP without any translation.
AGP Driving Control : This item allows you to adjust the AGP driving force. Choose Manual to key
in a AGP Driving Value in the next selection. This field is recommended to set in "Auto" for avoiding
any error in your system. The default setting is "Auto".
AGP Driving Value : This item allows you to adjust the AGP driving force.
AGP Fast Write : This item allows you to write AGP data faster.
OnChip USB : Set this option to "Enabled" or "Disabled" the onchip USB controller. The default
setting is "Disabled".
USB Keyboard Support : Set this option to "Enabled" or "Disabled" the USB keyboard support.
The default setting is "Disabled".
USB Mouse Support : Set this option to "Enabled" or "Disabled" the USB mouse support. The
default setting is "Disabled".
OnChip Sound : This item allows you to control the onboard AC 97 audio.
CPU to PCI Write Buffer : When this field is "Enabled", writes from the CPU to the PCI bus are
buffered, to compensate for the differences between the CPU and the PCI bus. When Disabled, the
writes are not buffered and the CPU must wait until the write is complete before starting another cycle.
The default setting is "Enabled".
PCI Dynamic Bursting : This item allows you to enable or disable the PCI dynamic bursting
function. The settings are "Enabled" or "Disabled".
PCI Master 0 WS Write : When enabled, writes to the PCI bus and are executed with zero wait
states. The settings are "Enabled" or Disabled".
PCI Delay Transaction : The chipset has an embedded 32-bit posted write buffer to support delay
transactions cycles. Select "Enabled" to support compliance with PCI specification version 2.1. The
settings are "Enabled" or "Disabled".
PCI#2 Access #1 Retry : When disabled, PCI#2 will not be disconnected until access finishes.
When enabled, PCI#2 will be disconnected if max retries are attempted without success. The
default setting is "Enabled".
AGP Master 1 WS Write : When enabled, writes to the AGP (Accelerated Graphics Port) are
executed with one wait states. The default setting is "Disabled".
AGP Master 1 WS Read : When enabled, reads to the AGP (Accelerated Graphics Port) are
executed with one wait states. The default setting is "Disabled".
Memory Parity / ECC Check : This item when enable detects the memory parity and error
checking and correction. The settings are "Enabled" or "Disabled".
29