Lanner electronics MB-X63 Series User Manual page 36

3.7 P M
OWER ANAGEMENT
The "Power Management Setup" controls the CPU card's "Green" features. When you select the
"POWER MANAGEMENT SETUP" on the main program, the screen display will appears as:
Power Management Setup Screen
ACPI function
Power Management
ACPI Suspend Type
PM Control by APM
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-Off by PWRBTN
Wake Up Events
á â àß Move
ACPI Function : This item allows you to enable or disable the Advanced Configuration and Power
Management (ACPI). The settings are "Enabled" and "Disabled".
Power Management :
Power Management
HDD Power Down
Doze Mode
Suspend Mode
á â àß Move
This category allows you to select the type (or degree) of power saving and is directly related to the
following modes:
1. HDD Power Down
2. Doze Mode
3. Suspend Mode
There are four selections for Power Management, three of which have fixed mode setting.
Disable (Default)
Min. Power Saving
Max. Power Saving
User Defined
ACPI Suspend Type : This item will set which ACPI suspend type will be used.
S1 (POS)
S2 (STR)
S
ETUP
CMOS Setup Utility – Copyright © 1984-2001 Award Software
Power Management Setup
Enter: Select +/-/PU/PD: Value
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
No power management. Disables all four modes.
Minimum power management.
Suspend Mode=1hr., and HDD Power Down=15min.
Maximum power management. –Only available for SL CPU's. Doze
Mode=1min., Standby Mode=1min., Suspend Mode=1min., and HDD Power
Down=1min.
Allows you to set each mode individually. When not disabled, each of the
ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges
from 1 min. to 15 min. and disabled.
The S1 sleeping state is low wake-up latency sleeping state. In this state, no
system context is lost (CPU or chipset) and hardware maintains all system
context.
The S2 sleeping state is STR sleeping state.
Enabled
Press Enter
S1 (POS)
Yes
Suspend -> Off
V/H SYNC + Blank
3
Instant – off
Press Enter
F10: Save Esc: Exit F1: General Help
User Define
Disable
Disable
Disable
32
Item Help
Menu Level
Item Help
Menu Level
Doze Mode=1hr. Standby Mode =1hr.,