Lanner electronics MB-X63 Series User Manual page 37

PM Control by APM : The default setting is "Yes".
No
Yes
Note: Enable this for O.S. with APM like Windows® 98, Windows® NT, etc.
Video Off Option : This option is for choosing the setting in which the monitor will turn off. The
default setting is "Suspend".
Always On
Suspend -> Off
All Modes -> Off
Video Off Method : This determines the manner in which the monitor is blanked. The default
setting is "V/H SYNC+Blank".
V/H SYNC+Blank
Blank Screen
DPMS
MODEM Use IRQ : Name the interrupt request (IRQ) line assigned to the modem (if any) on your
system. Activity of the selected IRQ always awakens the system. The default setting is "3".
Soft-Off by PWRBTN : Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state. The settings are: "Delay 4 Sec.", "Instant-Off".
Wake Up Events :
VGA
LPT & COM
HDD & FDD
PCI Master
Modem Ring Resume
RTC Alarm Resume
X
Date (of month)
X
Resume Time (hh:mm:ss)
Primary INTR
IRQs Activity Monitoring
á â àß Move Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
VGA : When enabled, you can set the VGA to awaken the system.
LPT & COM : When LPT & COM is "On", any activity from one of the listed system peripheral devices
or IRQs wakes up the system.
HDD & FDD : When HDD & FDD is "On", any activity from one of the listed system peripheral devices
or IRQs wakes up the system.
PCI Master : When PCI Master is "On", any activity from one of the listed system peripheral devices
or IRQs wakes up the system.
Modem Ring Resume : An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
System BIOS will ignore APM when power managing the system.
System BIOS will wait for APM's prompt before it enter any PM mode.
Always turn on.
During Doze mode, the monitor will be turned off.
During Standby mode, the monitor will be turned off.
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blank to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
OFF
LPT / COM
ON
OFF
Disabled
Disabled
0
0 0 0
ON
Press Enter
33
Item Help
Menu Level