Chapter 3 BIOS Setup
3.6 Integrated Peripherals
When you select the "INTEGRATED PERIPHERIALS" on the main program, the screen display will appears
as:
Integrated Peripherals Setup Screen
On-Chip USB
USB Keyboard Support
USB Mouse Support
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Init Display First
Onboard Lan Boot ROM
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART 2 Mode
X
IR Function Duplex
X
TX, RX inverting enable
X
Onboard Parallel Port
Parallel Port Mode
X
ECP Mode Use DMA
X
Move
On-Chip Primary PCI IDE: The chipset contains a PCI IDE interface with support for two IDE channels.
Select Enabled to activate the primary IDE interface. Select Disabled to deactivate this interface. The
settings are "Enabled" and "Disabled".
On-Chip Secondary PCI IDE: The chipset contains a PCI IDE interface with support for two IDE channels.
Select Enabled to activate the secondary IDE interface. Select Disabled to deactivate this interface. The
settings are "Enabled" and "Disabled".
USB Controller: Select Enabled if your system contains a Universal Serial Bus (USB) controller and you
have USB peripherals
USB Keyboard/Mouse Support: Set this option to "Enabled" or "Disabled" the USB keyboard/ mouse
support. The default setting is "Disabled".
AC97 Audio: This option sets the AC97 Audio.
Onboard FDD Controller: Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you want to use it. If you install add-in FDC or the system has no floppy drive, select
Disabled in this field. The settings are "Enabled" and "Disabled".
36
Phoenix – Award BIOS CMOS Setup Utility
Integrated Peripherals
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Add-On Card]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Standard
Half
No, Yes
[Disabled]
[Normal]
3
Enter: Select
+/-/PU/PD: Value
F5: Previous Values
Menu Level
F10: Save Esc: Exit F1: General Help
F7: Optimized Defaults
Item Help
User's Manual