Lanner electronics EM-9560 Series User Manual page 43

Video Off Option: This option is for choosing the setting in which the monitor will turn off. The default
setting is "Suspend".
Always On
Suspend
All Modes
Video Off Method: This determines the manner in which the monitor is blanked. The default setting is
"V/H SYNC+Blank".
V/H SYNC+Blank
Blank Screen
Soft-Off by PWR-BTN: When you select Instant Off or Delay 4 Sec., turning the system off with the on/off
button places the system in a very low-power-usage state, either immediately or after 4 seconds, with only
enough circuitry receiving power to detect power button activity or Resume by Ring activity.
PwrOn After AC Power Loss: This option specifies the Power ON/OFF Status after AC power loss.
User's Manual
Always turn on.
During Suspend mode, the monitor will be turned off.
During All Modes mode, the monitor will be turned off.
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blank to the video buffer.
This option only writes blanks to the video buffer.
Chapter 3 BIOS Setup
39