Bios Features Setup - Lanner electronics EM-9560 Series User Manual

3.4 Advanced BIOS Features Setup
When you select the "BIOS FEATURES SETUP" on the main program, the screen display will appear as:
BIOS Features Setup Screen
Virus Warning
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Floppy Disk Access Control
Boot Up NumLock Status
Security Option
PS/2 Mouse Function Control
HDD S.M.A.R.T Capability
Video BIOS Shadow
Shadow Areas
Full Screen LOGO Show
Move
The following explains the options for each of the features as listed in the above menu:
Virus Warning: The default setting of Virus Warning is "Disabled". When it is enabled, any
attempt to write the boot sector and partition table will halt the system and cause a warning
message to appear. If this happens, you can use an anti-virus utility on a virus free, bootable
floppy diskette to reboot, to clean and to investigate your system.
Quick Power On Self Test: The default setting is "Enabled". This speeds up the Power On Self
Test (POST) by skipping some items that are normally checked during the full POST. If your
system is functioning normally, you can choose this feature to speed up the booting process.
User's Manual
Phoenix - Award BIOS CMOS Setup Utility
Advanced BIOS Features
[Disabled]
[Enabled]
[Floppy]
[CDROM]
[HDD-0]
[Enabled]
[Disabled]
[R/W]
[On]
[Setup]
[Enabled]
[Enabled]
[Enabled]
[Press Enter]
[Disabled]
Enter: Select +/-/PU/PD: Value F10: Save
F5: Previous Values
Menu Level (
Allow you to choose
the VIRUS warning
feature for IDE Hard
Disk
protection.
function is enabled
and someone attempt
to write data into this
area, BIOS will show
a warning message on
screen and alarm beep
Esc: Exit F1: General Help
F7: Optimized Defaults
Chapter 3 BIOS Setup
Item Help
boot sector
If this
31