Lanner electronics EM-9560 Series User Manual page 45

Resource Controlled By: The Award Plug and Play BIOS has the capacity to automatically configure all of
the boot and Plug and Play compatible devices. However, this capability means absolutely nothing unless
you are using a Plug and Play operating system such as Windows98. If you set this field to "Manual"
choose specific resources by going into each of the sub menu that follows this field (a sub menu is
proceeded by a " "). The settings are "Auto (ESCD)", "Manual".
IRQ Resources: When resources are controlled manually, assign each system interrupt as one of the
following types, depending on the type of device using the interrupt.
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA Resources: The sub menu can let you control the DMA resource.
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
PCI/VGA Palette Snoop: Leave this field at "Disabled". The settings are "Enabled", "Disabled".
User's Manual
[Legacy ISA]
[Legacy ISA]
[PCI /ISA PnP]
[Legacy ISA]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
[PCI /ISA PnP]
Chapter 3 BIOS Setup
Item Help
Menu Level
Legacy ISA for devices
compliant with the original PC
AT bus specification, PCI/ISA
PnP for devices compliant with
the Plug and Play standard
whether designed for PCI or
ISA bus architecture.
Item Help
Menu Level
Legacy ISA for devices
compliant with the original PC
AT bus specification, PCI/ISA
PnP for devices compliant with
the Plug and Play standard
whether designed for PCI or
ISA bus architecture.
41