Product Re-Filling - LAVAZZA KLIX Advanta Operator's Manual

KLIX Advanta Operator's Manual
®
Your KLIX Advanta Machine Continued
®

3.3 Product Re-Filling

1. Open the machine door and select the Drink Setup menu. Select the required drink from
the list to refill in the carousel. The carousel will rotate and bring the stack for that drink to
the Filling Position A.
Note: The stack number stamped on the carousel should correspond to the drink selection icon
on the screen.
2. Check that the 5-digit Product Code (xxxxx) on the new cup sleeve packaging matches
the Product Code and Description shown on the screen for the configured drink. If there are
existing cups in the stack, remove the lid from the top cup of the existing stack of cups and
add the new stack.
1cm gap
Note: When filling with new cup stacks, always
leave a minimum of 1cm gap between the top of the
stack and the carousel. This avoids damaging cups
and jamming caused by overfilling.
Page 8