LAVAZZA KLIX Advanta Operator's Manual page 19

KLIX Advanta Operator's Manual
®
Water Filter Continued
4. Insert the filter in the filter head and twist in
a clockwise direction until the filter is screwed
in tightly.
5. For Hot Drinks only machines this
completes your filter installation.
6. For Cold Drinks, flush 2 buckets of water
through the filter, this removes trapped air
in the filter. In order to do this, press the
Flush Switch on the jetting unit in bursts of
45 seconds until the bucket is full. Empty
the bucket and repeat the flush for a second
time. The flush may have an automatic 'time
out'. This will occur if the Flush Button is held
for longer than one minute. If this happens,
shut the door of the machine. This re-sets
the machine and the Flush Procedure can be
resumed.
x2 buckets full
7. Vend another cold drink as in Step 1. Check
the water levels are consistent. If the levels
are different, check the filter is screwed in
tightly to filter head. Repeat step 6 onwards.
Vend another cup
8. If the cold drink water level consistency
cannot be achieved within two flush cycles,
please call Lavazza Professional Customer
Service department.
Page 19