Advertisement
Switch between your current connected device to your previous connected device by following these steps
Action | Press "CONNECT" button for 1 second |
Indicators | D200 LED blinks and stay lit in Blue |
Status | Ready to stream music |
Note: Ensure that your next paired device' s Bluetooth feature is ON and ready to accept connections.
You can re-connect to the last connected or previously connected device by either
Follow these steps to return to factory settings and clear paired device memory on the D200.
Action | Ensure the speaker is OFF. Press and hold Power Button for 8 seconds until D200 LED fast blinks |
Indicators | D200 LED blinks in Blue |
Status | Pairing mode. Ready to accept connection from other devices |
There's no Bluetooth link between my device and the Creative 0200. What should I do?
Bluetooth link is estab lished and paired between the devices but there's no music. What should I do? With some built-in Bluetooth enabled computers, 3rd party USB Bluetooth dongles or other devices, you may be required to manually specify/set-up the audio output as Creative D200. eg,(under sound and audio devices section on your computer's operating system) Please consult your manufacturer's documentation for further information.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the D200 that isn't answered in the manual? Leave your question here.