Creative D200 Quick Start Manual

CR::ATIV::
0200
0 Bluetooth®
compatible with Stereo
B!uetooth devices
Product Overview
1.

Product Overview

CONNECT Button
1.
2.
Volume Down I Up
3. Power ON/OFF
4. AUX IN
5. DC IN
Quick Start Guide
P/N 03MF809500003
:
Model No. MF8095
1 2
CR'Zt!,TIV:!
020
Enjoy audio from Bluetoot� devices
2.
a.
Power on the speaker and the LED status indicator will show
the speaker is not connected to any
b.
Press and hold the CONNECT button for 3 seconds while the speaker is
.
c.
D I.
Bluetooth
Network
Connections
Operator
Internet
USS
REV
A
Turn on the 8/uetooth feature on your dev
1 .
Search for Creative D200.
11.
Note: The above are generic steps to pair to a 8/uetooth
connectivity for your device, please consult your manufacturer's
d.
e.

Switching between paired devices

3.
Switch between your current connected device to your previous connected device by following these steps
Action Press "CONNECT" button for
Indicators D200 LED blinks and stay
Status Ready to stream music
Note: Ensure that your next paired
You can re-connect to the last connected or previously connected device by either
Pressing the CONNECT button once when it is turned ON
•
Initiate a connection from your 8/uetooth device when the speaker is not connected to any device
•

Reset to factory setting

4.
Follow these steps to return to factory settings and clear paired device memory on the
Action Ensure the speaker
Indicators
D200 LED blinks in
Status Pairing mode. Ready to accept connection from other devices
Playback with other audio devices via AUX
5.

FAQ (Frequently Asked Questions)

6.
There's no 8/uetooth link between my device and the Creative
Delete the Creative D200 name entry from your 8/uetooth device paired memory list and perform the steps in
•
Section 2 (Enjoy audio from 8/uetooth devices) to re-pair your
1
Position them within meter or closer to each other if you experience pairing difficulties
•
Ensure that both your 8/uetooth device and Creative D200 are not connected to any other devices
•
8/uetooth link is estab lished and paired between the devices b u t there's no music. What should
With some built-in 8/uetooth enabled
required to manually specify/set-up the audio output as Creative
on your computer's operating system) Please consult your manufacturer's documentation for further
green. This indicates that upon power
devices.
Pairing
,1
- · -
0
/
�
···· ····
/ 1'
Fast Blinking
ON.
. . . .
.
II. Ill.
CREATIVE
D200
9 Search results
PASSCODE
D200 0000
Creative
i ce. iii. Pair and connect to D200. If prompted for
iv. Pairing success ful, ready to stream music.
device, for more specific instructions on 8/uetooth
manual.
1
second
lit in Blue
device' s 8/uetooth feature is ON and ready to accept
is OFF. Press and hold Power Button for 8 seconds until D200 LED fast blinks
Blue
IN
0-<3-{!)
l,IN'lli OIJT
Optional (Sold
0200.
What should
device with Creative D200
computers, 3rd party USB 8/uetooth dongles or other
D200. eg,(under sound and audio devices
Press button to
release or remove
up, the status of
- ·- ,1 /
0
�
/ ,,
iv .
CREATIVE
D200
CONNECTED
0000.
passcode, enter
Connected.
Blue LED stays lit.
connections.
D200.
separately)
I do?
I do?
devices, you may be
section
information.