Creative Pebble V3 - Minimalistic 2.0 USB-C Speakers Manual

Overview

FRONT VIEW

1. 2.25" Full-range Drivers
2. Bluetooth^® / Source Button
   1. Bluetooth Pairing mode / LED Indicators:

      Select "Pebble V3" from the list of discovered Bluetooth devices on your mobile device to pair. Upon successful pairing, LED will pulse in blue.

      High Gain mode:

      Bluetooth Paired / Connected	Pulsing Blue
      Bluetooth Pairing mode	Flashing Blue

      Low Gain mode:

      Bluetooth Paired / Connected	Pulsing Green
      Bluetooth Pairing mode	Flashing Green

   2. Toggling Between Sources:

      * When AUX-in cable is detected / connected

      Note: When plugged into a PC / Mac for the first time, Creative Pebble V3 will be in USB Audio mode by default. When plugged into a power source that does not support USB Audio for the first time, Creative Pebble V3 will be in Bluetooth Pairing mode by default port instead to achieve optimum volume level
3. LED Indicator
   USB Audio mode:

   High Gain	Solid Blue
   Low Gain	Solid Green

   Note: High Gain / Low Gain Switch is located under the right speaker. Refer to illustration
   AUX-in mode:

   Detected / Connected

   Solid Cyan

4. Volume Knob
   Disclaimer: If Pebble V3's volume remains low when both device and speakers are at maxed volume while connected to a laptop's USB port, connect the speakers to a 10W USB port instead to achieve optimum volume level

REAR VIEW

5. Passive Radiators
6. AUX-in Port
7. High Gain / Low Gain Switch

Setting Up Creative Pebble V3

USB Audio mode

Bluetooth mode

AUX-in mode*

* AUX-in cable not included

Master Reset

Flashing Blue / Green

Once Master Reset is complete, previously paired Bluetooth devices will be removed. Creative Pebble V3 will then return to its original default state.

Technical Specification

• Speaker Power: 2 x 4W RMS
• Total System Power: Up to 8W RMS, Peak Power 16W
• Drivers: 2.25" Full-range Drivers with Built-in Passive Radiators
• Wireless Technology: Bluetooth 5.0
• Bluetooth Profiles: A2DP (Wireless stereo Bluetooth)
• Wireless Type: Bluetooth Classic
• Operating RF Range: 2402–2480 MHz
• Max. RF Output Power: < 4 dBm
• Input: 5V 2A
• Signal-to-Noise Ratio: 75 dB
• Frequency Response: 100–17,000 Hz
• Connectivity: USB Audio, Bluetooth, 3.5 mm Analog Stereo-in
• Operating Temperature: 0–45°C

Note: Up to 8W RMS when Gain is set to "High" while plugged into a 10W USB-C Port / USB-C Power Adapter / 5V 2A USB-A Power Adapter*

* Adapter not included

Other Information

Please visit creative.com/compliance/pebblev3 for the user guide, safety and regulatory information.

Please visit creative.com/support/pebblev3 for all other support related to your product.

Note: Compliance markings are located at the bottom of the product