4.2 Connector and Jumper description
Connector / Jumper
description
J1
A1 or A2
F1 or F2
BEEP1
PORT1~ PORT3
(Mini-SAS Port)
Active/FAIL LED PIN connector:
This connector is one-pin connection from HBA to LED on chassis. For detail LED connection
requirement and display information, please refer to:
https://filedn.com/lG3WBCwKGHT7yNuTsFCwXy0/HighPoint-
Download/Document/Guide/RocketRAID/General%20Guide/LED_connection.pdf
4.3 Installing the RocketRAID Host Adapter
Note: Make sure the system is powered-off before installing the RocketRAID host adapter.
The RocketRAID 272x/271x includes both standard and low-profile brackets. It may be necessary to attach
the low-profile bracket in place of the standard bracket, depending upon the chassis design.
1.
Open the system chassis and locate an unused PCI-E x8(or PCI-E x16) slot.
2.
Remove the PCI slot/bracket cover.
3.
Gently insert the RocketRAID card into the PCI-Express slot, and secure the bracket to the system
chassis (illustration shows RocketRAID 2720).
RocketRAID 2722
RocketR ID
RocketRAID
A
2710
2
Active LED PIN
N/A
Fail LED PIN
N/A
SFF-8087
SFF-8088
RocketRAID
711
2720
I2C connector
Active LED PIN Active LED PIN
Fail LED PIN
Alarm buzzer
SFF-8087
7
RocketRAID
RocketRAID 2722
2721
N/A
Fail LED PIN
N/A
SFF-8087 &
SFF-8088
SFF-8088