4.
After installing the adapter, attach hard drives to the host adapter.
Note: Many server-level chassis include hard-drive hot-swap bays. For these system chassis, cables are
attached to the chassis backplane, rather than directly to each individual hard drive. Consult the chassis
manual for proper installation procedures.
5.
Close and secure the system chassis.
4.4 Verifying Installation
Once the host adapter and hard drives have been installed into the chassis, boot-up the system to verify
that the hardware is properly recognized.
1.
Power on the system. If the system detects the presence of the adapter, the RocketRAID BIOS Utility
will be displayed during boot up.
2.
Press "Ctrl"+"H" key combination to access the RocketRAID adapter's BIOS Utility.
8