Driver Installation -Linux And Freebsd - HighPoint RocketRAID 2700 Series User Manual

Pci-express 2.0 x8 hba sas/sata 6gb/s raid host adapters

Hide thumbs Also See for RocketRAID 2700 Series:

Table of Contents

Reboot the system when prompted. The RocketRAID host adapter will be ready for use after Windows

reboots.

Installing the driver during a fresh Windows OS installation

1. Boot from the Windows Installation DVD.

2. When the screen "where do you want to install Windows" appears, click "Load

driver" and browse for the driver location. Windows can install drivers from

several media types: floppy diskette, USB flash disk or CD.

3. Select the RocketRAID 2700 controller driver, and click "Next".

4. The driver is now installed – the disk or array will be recognized as available disk space. Windows setup

will then proceed normally.

7.2 Driver installation -Linux and FreeBSD

Please refer to the Driver Installation Guide and README file under the driver package for the

installation steps.

Software location (RocketRAID Software CD):

/Driver/RR272x_1x/Driver

Please always check HighPoint website for latest software download.

Table of Contents