Self-Timer - Rollei AFM 35 Operating Instructions Manual

SELF-TIMER

Self-timer
›
To activate the self-timer, press button (9) until the
corresponding icon is displayed.
›
Place the AF area over your main subject and frame
your picture, if necessary locking focus (see p. 19).
Both the focus and the exposure setting will be
locked in as you press the shutter release halfway.
›
Do not stand in front of the camera when triggering
the exposure, since this would result in blur and
faulty exposure.
›
Press the shutter release fully to start the countdown.
›
The self-timer LED will stay lit for about seven
seconds and blink for the remaining three seconds
before exposure.
30
›
The mode is automatically disabled after exposure
or when the camera is switched off.
›
To abort the countdown, simply press the self-timer
button (9).