Energy-saving mode: If the
■
appliance is not operated for a
prolonged period (approx. 5
minutes), the Touch-Display lighting
goes out before the programme
starts and when the programme has
ended to save energy, # flashes.
Touch any area of Touch-Display to
activate the display backlighting.
When the programme is running,
most of the Touch-Display lighting
goes out. Touch any area of Touch-
Display to re-activate the lighting.
Automatic switch off: If the
■
appliance is not operated for a
prolonged period (at least 20
minutes, depending on the water
level inside of appliance), it will
automatically switch off before the
programme starts or after the
programme has ended. Press the
power button # again to switch on
the appliance.
If the laundry is then dried in the
■
appliance, select the maximum
possible spin speed. The less water
the laundry contains, the less time
and energy are required for drying.
Do not dry dripping wet laundry.
Positioning and connecting
5
Positioning and
connecting
S tandard accessories
P o s i t i o n i n g a n d c o n n e c t i n g
Check the appliance for transport
Note:
damage. Never use a damaged
appliance. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
Customer Service.
en
13