Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Start DC6050
Summary of Contents for Start DC6050
- Page 1 DC6050...
-
Page 2: Table Of Contents
Page 7 WARRANTY POLICY FOR LD SERIES LABEL DISPENSERS START International warrants all parts on DC6000 series label dispensers against defects in design, materials and workmanship for a period of 1080 days. Labor to replace defective parts will be performed at no charge for the first 360 days after date of purchase. -
Page 3: Maintenance
MAINTENANCE Turn machine off when not in use. Remove liner material from take-up hub at approximately 3” in diameter or if motor appears to be straining. Do not operate machine without covers in place. Do not operate if inspection reveals a damaged power or sensor cord. EXPLODED VIEW... -
Page 4: Features
3. If available, date purchased and copy of invoice or packing slip. START will issue a RMA (Return Merchandise Authorization) for repair. Return machine to START, insured and prepaid. START will notify the customer if there is a repair charge. SPECIFICATIONS: Model#... -
Page 5: Set-Up & Operation
SET-UP INSTRUCTIONS SET-UP INSTRUCTIONS... -
Page 6: Safety
SET-UP INSTRUCTIONS... -
Page 7: Photosensor Adjustments
ADJUSTMENTS Hold Down: Using the upper thumbscrew on the side of the machine, adjust the hold down for tensioning. For best results, labels should be pressed firmly against the strip plate. However, if the labels are held too tightly, they will cause excessive drag on the motor. Photosensor: The photosensor can be adjusted in any direction by using the lower thumbscrew on the side of the machine and the thumbscrew underneath the photosensor bracket.
Need help?
Do you have a question about the DC6050 and is the answer not in the manual?
Questions and answers