Gravely 926064 Operator's Manual page 16

See Figure 18.
7. Remove hardware securing brush lock
trigger to handlebar and allow trigger to
rest on brush attachment.
1
1. Machine Screw
2. Lock Washer
3. Brush Lock Trigger
Figure 18
WARNING: ALWAYS support
unit frame and brush attachment
when loosening hardware
holding them together.
IMPORTANT: Support tractor / frame so it will
not tip when disconnected from brush
attachment in next step.
See Figure 19.
8. Remove hardware securing brush
attachment to tractor / frame.
9. Rotate brush attachment apart from
tractor / frame on mount rod and remove
from frame.
2
3
1
1. Hex Head Screw
2. Mount Rod
3. Mount Bracket
WARNING: AVOID INJURY.
Before rotating unit, close fuel
valve and drain fuel from tank
and fuel system. (Refer to
engine manual for instructions.)
Make sure unit is secure and will
not tip.
See Figure 20.
CAUTION: AVOID ENGINE
DAMAGE. Do not leave unit in
service position for longer than
30 minutes. Allow 30 minutes for
oil to return to crankcase before
starting engine.
10. Slowly rotate tractor / frame forward so
unit rests on attachment sheave. Protect
attachment sheave so it does not incur
damage.
11. Remove hardware securing bottom cover
and remove bottom cover.
EN - 14
3
2
Figure 19