Connecting And Using A Source Device; Read Below Before Installing The Monitor; Connecting And Using A Pc; Connection Using The D-Sub Cable (Analog Type) - Samsung S24R352FHU User Manual

Chapter 03

Connecting and Using a Source Device

Read below before installing the monitor.

1 Before installing the product, check the shapes of both ports of the supplied signal cables and the
shapes and locations of the ports on the product and external device.
2 Before installing the product, make sure you remove the power cables from both the product and
the external device to prevent damage to the product due to a short circuit or over current.
3 After all signal cables have been properly connected, connect the power cables back to the product
and the external device.
4 After installation is completed, make sure you read the user guide to acquaint yourself with the
product functions, precautions and other information required to use the product properly.

Connecting and Using a PC

Select a connection method suitable for your PC.
― Connecting parts may differ in different products.
― Provided ports may vary depending on the product.

Connection Using the D-SUB Cable (Analog Type)

First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.)
are removed.
D-SUB IN
20