ELECTRICAL COMPONENTS
CHECKING THE HEADLIGHT AIM
64sa24c
" 1 Vertical movement adjusting bolt 1 (Inside screw)
2 Vertical movement adjusting bolt 2 (Outside screw)
3 Aiming caution label
Before checking the headlight aim:
1. Make sure the body around the headlight is not deformed.
2. Park the vehicle on a level spot.
3. Get into the driver's seat and put the vehicle in a state ready
for driving (with a full tank).
4. Bounce the vehicle several times.
332
Adjusting the vertical aiming
64sa24d
" 1 For vertical movement adjusting bolt 1
(Inside screw)
2 For vertical movement adjusting bolt 2
(Outside screw)