Lexus SC 430 2002 Manual page 91

(c) Erasing the entire HomeLink
(all three programs)
To erase all previously programmed codes at one time, press
and hold down the 2 outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase the programs stored
R
in the HomeLink memory.
CAUTION
D When programming the HomeLink
Transceiver, you may be operating a garage door or
other device. Make sure people and objects are out
of the way of the garage door or other device to
prevent potential harm or damage.
R
D Do not use this HomeLink
Universal Transceiver
with any garage door opener that lacks the safety
stop and reverse feature as required by federal safety
standards. (This includes any garage door opener
model manufactured before April 1, 1982.) A garage
door opener which cannot detect an object
(signaling the door to stop and reverse), does not
meet current federal safety standards. Using a
garage door opener without these features increases
risk of serious injury or death.
R
memory
This device complies with Part 15 of the FCC Rules
and with RSS−210 of the Industry Canada. Operation
is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
WARNING: This transmitter has been tested and
complies with FCC and Industry Canada
DOC/MPAC rules. Changes or modifications not
expressly approved by the party responsible for
R
compliance could void the user 's authority to
Universal
operate the device.
INTERIOR EQUIPMENT
73