Daikin FMA50RVMA Operation Manual page 24

Description of airflow direction settings
and operation
The range of movement of the airflow direction
blades varies by indoor unit model. Consult the
dealer of purchase for details.
„ Ceiling Mounted Cassette
Airflow
(Round Flow, 4-way Flow, 2-way Flow)
direction
„ 4-Way Blow Ceiling Suspended
settings
The airflow direction can be fixed in any
position in the range Position 0 to Position 4.
Indoor unit
Fixed
(Desired position)
The airflow direction blades
automatically move up and down within
the range of Position 0 to Position 4.
Swing
Indoor unit
(Swing)
The airflow direction changes automatically
according to the temperature of the room.
However, during FAN OPERATION, the
Automatic
airflow direction is set to Position 0.
* Depending on the model, it may not
be possible to use this function.
PROGRAMME TIMER OPERATION
Operate in the following order.
• The timer is operated in the following 2 ways.
Programming the stop time ( OFF)
.... The air conditioner stops operating after the
set time has elapsed.
Programming the start time ( ON)
.... The air conditioner starts operating after the
set time has elapsed.
• The start and the stop time can be
simultaneously programmed.
• The timer setting is effective only once. When
using the TIMER operation every day, the
setting is required before each use.
Setting the timer
1
TIMER MODE ON/OFF
Press the TIMER MODE ON/OFF button.
The display flashes.
For setting the timer stop .... " OFF"
For setting the timer start .... " ON"
9
Up/down airflow
(Desired position)
(Swing)
2
PROGRAMMING TIMER
Press the PROGRAMMING TIMER button
and set the time for stopping or starting the
air conditioner.
When this button is pressed, the time
advances by 1 hour.
When this button is pressed, the time
goes backward by 1 hour.
• Keep pressing the button to change the
setting time continuously.
• The timer can be programmed a maximum
of 72 hours.
3
TIMER RESERVE
Press the TIMER RESERVE button.
The timer setting procedure ends.
The display changes from flashing light to a
constant light.
• Make sure that the receiving tone of the
indoor unit makes a beeping sound.
If the receiving tone does not sound, cancel
the timer according to the steps below, and
then set the timer following steps
above again.
Cancelling the timer
1
ON/OFF TIMER
When the on TIMER MODE ON/OFF button
is pressed, the screen display flashes as
described below.
For the off timer .... " OFF"
For the on timer .... " ON"
2
TIMER CANCEL
When the TIMER CANCEL button is
pressed, the timer setting that is blinking is
cancelled.
• Check that the indoor unit's receiving tone
beeps twice. If the receiving tone does not
sound, select the timer you want to cancel
again, and then cancel it.
to
1 3
English