Amart Furniture ARUBA 73971 Assembly Instruction Manual

Lamp table

Imported by Amart Furniture Pty Ltd

For any assistance with assembly or for missing parts please phone

Amart Furniture, Customer Service Free call 1800 351 084

ASSEMBLY INSTRUCTION

ARUBA LAMP TABLE

ITEM CODE

73971

Imported by Amart Furniture Pty Ltd, Brisbane Qld, Australia.

For any assistance with assembly or for missing parts please

phone Amart Furniture, Customer Service Free call 1800 351

084

,Brisbane,

Qld,Australia.

ITEM CODE 73971

Table of Contents

Need help?

Do you have a question about the ARUBA 73971 and is the answer not in the manual?

Page 1 ARUBA LAMP TABLE ITEM CODE 73971 Imported by Amart Furniture Pty Ltd, Brisbane Qld, Australia. For any assistance with assembly or for missing parts please phone Amart Furniture, Customer Service Free call 1800 351 Imported by Amart Furniture Pty Ltd ,Brisbane, Qld,Australia.
Page 2 PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of use 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly.
Page 3 PARTS LIST LAMP TABLE BODY FOOT A. BOLT 1/4''X20MM B. FLAT WASHER C. ALLEN KEY 1PCS 8PCS 8PCS ITEM CODE 73971...
Page 4 • Attach foot (2)to lamp table body (1) using flat washers (b) and bolts (a). • Tighten with Allen Key (c). Sides of the leg that have angle must point inward OUTSIDE INSIDE ITEM CODE 73971...
Page 5 ASSEMBLY IS COMPLETE ITEM CODE 73971...
Page 6 CARE AND MAINTENANCE • A multi-step finish is applied to all our furniture, but all wood comes from nature. Because of this, there will be natural variations in surface texture and grain like knots, mineral streaks and sap runs that may affect the finish.