PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of use 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly.
PARTS LIST 1 HEADBOARD 2 FOOTBOARD 3 SIDERAIL 4 CENTRE RAIL 5 SUPPORT LEGS 6 SLATS (1538mm*88mm) B. BOLT 5/16''X60MM A. BOLT 5/16''X32MM C. ALLEN KEY D. SCREW 4X30MM 2PCS 1PCS 8PCS 6PCS E. FLAT WASHER F. LOCK WASHER 8PCS 8PCS ITEM CODE 59637...
ITEMS REQUIRED A. BOLT 5/16''X32MM F. LOCK WASHER E. FLAT WASHER C. ALLEN KEY 1PCS 8PCS 8PCS 8PCS • Attach side rail (3)to headboard (1) and footboard (2) using flat washer (e), lock washer (f) and bolts (a). • Tighten with Allen Key (c). ITEM CODE 59637...
Page 5
ITEMS REQUIRED B. BOLT 5/16''X60MM C. ALLEN KEY 1PCS 2PCS • Attach support legs (5) to centre rail (4) with • bolts (b) • Tighten with allen key (c) ITEM CODE 59637...
Page 6
• Put centre rail (4) between head board (1) and foot board (2) . ITEM CODE 59637...
Page 7
ITEMS REQUIRED D. SCREW 4X30MM 6PCS • Attach slats (6) to siderail (3) using screws (d). • Use Screwdriver or Power Drill on Low Speed. ITEM CODE 59637...
Page 8
ASSEMBLY IS COMPLETE CAUTION ALWAYS LIFT YOUR BED WHEN MOVING/RELOCATING – DO NOT DRAG. DRAGGING CAN CAUSE THE CENTRE SUPPORT LEGS TO BEND/BREAK ITEM CODE 59637...
Care and maintenance REGULAR CARE: • Protect from direct sunlight • Vacuum regularly using low suction • Rotate reversible cushions regularly CLEANING: • Do not remove cushion covers for separate cleaning even though they may have zippers • Do not wash , Do not dry clean , Do not shampoo clean •...
Need help?
Do you have a question about the ARAGON and is the answer not in the manual?
Questions and answers